Filter
Top Products
11
3.1.1 How to restart the Content Server
1. Press Enter to display the Main Menu screen.
2. From the Main Menu screen, use the Up or Down arrow to select Commands.
3. Press Enter to confirm your selection.
4. From the Commands menu, use the Up or Down arrow to select Restart and press
Enter.
5. You will be asked to confirm this action on the following screen. At the Restart? prompt,
use the Up or Down arrow to select Yes and press Enter to confirm.
3.1.2 How to shutdown the Content Server
1. Press Enter to display the Main Menu screen.
2. From the Main Menu screen, use the Up or Down arrow to select Commands.
3. Press Enter to confirm your selection.
4. From the Commands menu, use the Up or Down arrow to select Shutdown and press
Enter.
5. You will be asked to confirm this action on the following screen. At the Shutdown?
prompt, use the Up or Down arrow to select Yes and press Enter to confirm.
NOTE:
Please note that there is currently no indication on the LCD panel to tell the
administrator that the machine has shut down and that it is safe to turn off
the server.
Typically server is in a state that it is safe to shutdown within a few minutes.
3.2 Restoring the Content Server
to factory settings
The administrator can restore the Content Server to factory settings partially or fully via the LCD
panel. A partial restore to factory settings – Config Restore - restores the factory configuration
files and templates, but does not affect the content stored on the server. A full restore to factory
settings – Full Restore – removes content and deletes all media files in addition to restoring the
factory configuration files and templates.