TANDBERG Content Server User Manual
18
4.1.2 Gatekeeper
The Gatekeeper configuration menu contains the following settings:
Gatekeeper Discovery
IP Address
Port
Gatekeeper
Discovery
Gatekeeper Discovery configuration can be set to OFF,
MANUAL or AUTO.
OFF - The system will not use a gatekeeper for calls.
MANUAL - The system will use a specific gatekeeper identified
by Gatekeeper IP-address.
AUTO - The system will automatically try to register on any
available gatekeeper. If a gatekeeper responds to the request
sent from the codec within 30 seconds this specific gatekeeper
will be used. This requires auto discovery on the gatekeeper as
well. If no gatekeeper responds, the system will not use a
gatekeeper for making H.323 calls and hence an IP-address
must be specified manually.
IP Address
This gatekeeper IP-address will be used if you specify
Gatekeeper Discovery: Manual.
Port
This port setting should not be changed unless the local network
configuration specifies a different port.