Filter
Top Products
VIZIO VO370M/VO420E User Manual
10
www.VIZIO.com
Chapter 1
Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The
VIZIO name lights white when
powered on and orange when
powered off.
REMOTE CONTROL SENSOR –
This is the window through which
all of the remote control signals
pass to the sensor. Point the
remote control directly at this
window for the best response to
the remote signal.
Side Panel Controls
POWER ( ) – Switch the FHDTV on by pressing the button once. Press the
button again to the FHDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will proceed to the next level.
CH + / - – Use these buttons to step up or down the TV channels. While the OSD is
active, these buttons function as up and down controls in the OSD menus.
VOL + / - – Use these buttons to increase or decrease to the speaker volume.
While the OSD is active, these buttons function as left and right controls in the OSD
menus.
INPUT (ENTER) – Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV1/S-Video, AV2, Component1, Component2, RGB,
HDMI 1, HDMI 2 and HDMI 3. Once you have stepped
through the entire sequence, you will return to the
beginning. If a sub-menu is active, pressing this button will
return to the previous menu level.
Additionally, when the OSD is active, this button confirms
the menu function to be adjusted. When the OSD is not
active, pressing this button will display the current input
mode.