68
Displaying the calibration status
You can display the status of your system calibration.
1. Select “Status”. Press
OK
.
A window indicating the current calibration status will appear. ✔
The status information is indicated in percent.
Manual calibration
You can also calibrate the TravelPilot DX-V manually. To do so, you have to drive a
distance of at least 110 yd at a speed of not more than 20 mph. Please note that you
should use as accurate a driving distance as possible.
1. Select “Manual”. Press
OK
.
Now you will be instructed to enter the distance you intend to drive. ✔
2. Press
on the remote control unit to enter the first digit. Press
OK
.
3. Mark the remaining digits one after the other and press
OK
to confirm each
digit.
4. Press
OK
for a longer time to confirm your entry.
Now you will be instructed to drive the distance entered. ✔
5. Follow the other instructions on the screen.
System settings
