IPL T PC1 Interface • Software Setup
Software Setup, cont’d
3-14
IPL T PC1 Interface • Software Setup
3-15
5. Create a group folder for your output device functions:
a. Click the Add folder icon ( ) above the
GlobalViewer
®
Web Group(s) section. A folder icon
with the name Group Folder appears in the tree
window.
b. Give this folder a name, preferably the name of the
device for which you added the driver in step 4.
6. Select IR driver functions for your output device:
a. Make sure that the folder you added in the Web
Group(s) section is highlighted.
b. In the IR Driver Function(s) (left) section, click on one
or more functions that you will want to monitor and/
or schedule on the output device. (To select multiple
functions, hold down the Ctrl key while clicking on
each function name.)
7. Click the green right-arrow button at the right of the IR
Driver Functions section. The functions you selected are
listed below the selected folder in the GlobalViewer
®
Web
Group(s) section.
Assigning an IR driver
To assign a device driver to the IR port,
1
. In the IP Link tree view area, click on an IR port name.
The IR Configuration tab is displayed.
2
. In the IR Driver Selection field, select a device type,
manufacturer, and Version from the drop-down boxes.
3
. Select an available driver.
4. Click Add Driver.
