IPL T PC1 Interface • Software Setup
Software Setup, cont’d
3-22
IPL T PC1 Interface • Software Setup
3-23
11. If desired, follow steps 5 through 10 to add more
conditions. You can select either a port name or the device
name and IP address in the Subject Port field. In the
example below, a "day of the month" condition has been
added.
N
When you add multiple conditions, all of the conditions
must be met in order for the specified action/e-mail to
occur.
12. When finished adding conditions, click Next.
13. If desired, select an action and click Apply Action. If not,
proceed to step 14.
14. Click Next again if you want to add an e-mail message. If
not, click Done.
15. If desired, select an e-mail message and contacts, and click
Apply Email/Contacts.
16. When finished, click Done. The dialog box closes.
Building and Uploading a GC File
Before a Global Configuration (GC) file is active in the
GlobalViewer interface, the GC file must be “built” and
“uploaded” to a GlobalViewer host device.
The “build” process compiles all of the configuration data you
have entered into the GC file for each A/V network device.
The “upload” process delivers the built (compiled) file to the
GlobalViewer host device.
After the GC file has been uploaded to a host device, you can
launch the GlobalViewer interface by entering the host device’s
IP address in the address field of an Internet browser.
Step Twelve: Build the Global Configurator file.
There are two Build commands:
Build All Configurations — Compiles configuration data for all
devices in the GC file, including data for devices previously
uploaded to a GlobalViewer host device.
Build Changed Configurations — Compiles configuration data
only for devices that have been added or changed since the
previous build cycle.
To initiate a “Build (all)” process,
1. From the Build menu, select Build All Configurations...,
or click the Build All Configurations icon (shown
at right).
The Please Wait. Building Configuration(s)... dialog
box opens and displays a progress bar while the GC file is
being built.
