A SERVICE OF

logo

Open as PDF
next previous
9292 93
Return to the Top page
Setting Up
Return to the Top page
Setting Up
AV-IN1 Name/AV-IN2 Name*
2
Setsanametobedisplayedwhenyouselect
asystemthatisconnectedviatheAVINPUT
port.Defaultis“VIDEO”.
*1ThisitemcanbesetwheninSTANDBY
sourceandalsotheiPodisdisconnected.
*2[AV-IN2Name]becomessettablewhen
“AV-IN2”isselectedin[iPodAVInterface
Use].
AV Output Interface Setup
YoucanselectanAVsourcetobeoutputat
theAVOUTPUTport.Defaultis“VIDEO1”.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [AV-OUT].
AV-OUT Interface screen appears.
4 Touch [2] or [3] to set [AV-OUT] to
VIDEO, DISC, TV , iPod, or OFF.
Software Information
Checkthesoftwareversionofthisunit.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Software].
Software Information screen appears.
4 Confirm the software version. Touch
[Update] as necessary.
NOTE
•Forhowtoupdatethesoftware,seetherelevant
updateproceduremanualwhichcomeswiththe
software.
AV Input Setup
YoucansetAVinputparameters.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
4 Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5 Set each item as follows.
iPod AV Interface Use*
1
SetstheterminalwhichiPodisconnected.
SettingvaluesareiPodandAV-IN2.
iPod(Default):SetthiswhenaniPodis
connectedusingKCA-iP202
connector.Youcanlistento
audioorwatchvideoinyour
iPodasiPodsource.
AV-IN2:SetthiswhenaniPodisconnected
usingKCA-iP102connector.Youcan
listentoaudioinyouriPodasiPod
source.Youcanalsolistentoaudioor
watchvideooutputfromaAVdevice
asAV-IN2source.