A SERVICE OF

logo

9898 99
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
DSP select
YoucanselectwhetherusingDSP(Digital
SignalProcessor)System.
1 Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Bypass
ThereisnoeffectbyDSP.
Through
ThereisaneffectbyDSP.
NOTE
•Whenthemodeissetto[Bypass],DSPSystem
cannotbeadjusted.
Controlling General Audio
1 Touch [Audio Control].
2 Set each item as follows.
Fader #/Balance #
Adjustthevolumebalancearoundthe
touchedarea.
[2]and[3]adjusttherightandleftvolume
balance.
[5]and[]adjustthefrontandrearvolume
balance.
Volume Offset*
Finelyadjustthevolumeofthecurrentsource
tominimizethedifferenceinvolumebetween
differentsources.
Subwoofer Level
Adjuststhesubwoofervolume.Thissettingis
notavailablewhensubwooferissetto“None”.
SeeSpeaker setup (P.95).
Bass Boost
Setstheamountofbassboostamong“OFF”/
“Level1”/“Level2”/“Level3”.
Loudness
Turnstheloudnesscontrolfunctiononor
off.Ifturnedon,highandlowtonesare
automaticallyenhancedduringlowvolume.
Settableonlywhenzonefunction(P.102)is
settooff.
*Ifyouhaveincreasedthevolumefirst,then
reducedthevolumeusingthe“Volume
Offset”,thesoundgeneratedifyou
suddenlyswitchtoanothersourcemaybe
extremelyloud.