35
3
Getting Started with the Configuration Manager
The Hurricane 9200/S includes a preinstalled program called the
Configuration Manager, which provides an interface to the software
installed on the device. It enables you to configure the device
settings to meet the needs of your network. You access it through
your web browser from any PC connected to the Hurricane 9200/S
via
the LAN or USB ports.
This chapter provides basic information on using the Configuration
Manager.
%,8
The Configuration Manager program is preinstalled into memory on
the Hurricane 9200/S. To access the program, you need the
following:
A PC or laptop connected to the LAN port on the device as
described in the Quick Start chapter.
A web browser installed on the PC. The program is
designed to work best with Microsoft Internet Explorer®
version 5.0, Netscape Navigator® version 6.1, or later
versions.
You can access the program from any computer connected to the
Hurricane 9200/S via the LAN or USB ports (H9200 only).
1. From a computer connected via Ethernet or USB (H9200
only), open your web browser, type the following URL in the
web address (or location) box, and press <Enter>:
http://192.168.1.1
This is the predefined IP address of the Ethernet interface
(however, since the USB interface is in the same subnet as the
LAN interface you can use this IP address from a USB
computer also).
A login screen displays:
