B-EX (feedback eliminator) button
Mode*, use this button to cycle through the 3 levels of
DSP feedback eliminator or to turn it off.
- Accesses the music Bass and
Treble menus for Zone 2. Press the Zone 2 Menu button
to choose either Bass2 or Treble2 and use the
on the remote to decrease the Bass or Treble and the
- Use the arrow buttons to adjust the
various speaker settings. Use the
select which settings to adjust. Use the
to change the parameters for each settings. To open the
Speaker Settings menu press either of the
rows or press the MENU button.
- Accesses the Speaker Settings Menu.
Use the arrow buttons to make changes in the Speaker
Settings Menu. All of the information will appear on the
display screen on the front panel.
- Press this button to perform a channel
test. The channel test sends sound to each of the speak-
er outputs to test whether they are connected correctly.
The display screen will show which speaker is being tested
at a given time so that you can make sure the connec-
- Toggles between input channel Zone 1
and input channel Zone 2.
Zone 1: Analog and digital input channels (DVD, AUX1,
AUX2, AUX3, TV, AM/FM Tuner, 7.1 CH, OPT1, OPT2,
COAX1, COAX2, COAX3, TAPE and CD)
Zone 2: Analog input channels (DVD, AUX1, AUX2,
AUX3, TV, AM/FM Tuner, TAPE and CD)
- Toggles between the TAPE
and COAX1 input channels. When the DTX-9909K is
set to Zone 2, this button will only access the TAPE input
channel as the digital coaxial channels are not available on
- Selects the 7.1 surround
sound input channel. When the DTX-9909K is set to
Zone 2, the 7.1 surround sound input channel will not be
- Selects the TV input channel.
CD/COX2 input channel button
CD and COAX2 input channels. When the DTX-9909K
is set to Zone 2, this button will only access the CD input
channel as the digital coaxial channels are not available on
AUX3 input channel button
DVD/OPT1 input channel button
DVD and OPT1 input channels. When the DTX-9909K is
set to Zone 2, this button will only access the DVD input
channel as the digital optical channels are not available on
AUX2/COX3 input channel button
the AUX2 and COAX3 input channels. When the DTX-
9909K is set to Zone 2, this button will only access the
TAPE input channel as the digital coaxial channels are not
- Selects the AM/FM tuner channel and
toggles between AM and FM. Hold this button down for
1 second to begin Auto Tuning. The stations for each
band (AM and FM) must be tuned before using.
AUX1/OPT2 input channel button
the AUX1 and OPT1 input channels. When the DTX-
9909K is set to Zone 2, this button will only access the
AUX1 input channel as the digital optical channels are not
Descriptions and Functions
