VocoPro DTX-9909K Manual

A SERVICE OF

next previous

42

•

RVB TIME (Microphone DSP reverb time)

Use this setting to set the reverb time for the DSP micro-

phone reverb effect.

NOTE: The DSP effect volume must be set loud enough in

order to hear the effect

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust

the

reverb time

.

Reverb Time Range:

0

--

0 -- 0

80

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

increase the reverb time.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control

decrease the reverb time.

•

RVB VOLUME (Microphone DSP reverb volume)

This setting determines how much DSP reverb is present in

the microphone signal.

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust the volume for

the

DSP reverb effect

.

Reverb Volume Range: 0 -- 80

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

raise the reverb volume.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control to

lower the reverb volume.

•

FB TIME (Reverb feedback time)

Use this setting to set the reverb feedback time for the DSP

microphone reverb effect.

NOTE: The DSP effect volume must be set loud enough in

order to hear the effect

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust

the

reverb feed-

back time

.

Feedback Time Range:

0ms

--

0ms -- 0ms

80ms

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

increase the reverb feedback time.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control

decrease the reverb feedback time.

•

OK (Karaoke output mode)

Use this setting to select which speakers will be used for

microphone output.

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

cycle through the av

ail-

able

output modes

.

Choices: L R, C, L R C, SL SR L R C, and SL SR C

L R

- Microphone output will be in the Front Left and Front

Right speakers

C

- Microphone output will be in the Center speaker

L R C

- Microphone output will be in the Front Left, Front

Right, and Center speakers

SL SR L R C

- Microphone output will be in the Surround

Left, Surround Right, Front Left, Front Right, and Center

speakers

SL SR C

- Microphone output will be in the Surround Left,

Surround Right, and Center speakers

•

FB EX (Feedback reducer)

Use this select which Feedback Reducer setting to use

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

c

ycle through the

avail-

able Feedback Reducer settings: 1, 2, 3, and O

FF

Karaoke Mode cont.