VocoPro DTX-9909K Manual

A SERVICE OF

next previous

41

•

MIC1 VOL (Microphone channel 1 volume)

Use this setting to set the maximum volume level for micro-

phone channel 1. NOTE: If this is set too low, the micro-

phone will not be loud enough.

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control

to

adjust the

maximum

volume for microphone

channel

1

.

Volume Range: 0 -- 80

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

raise the volume.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control to

lower the volume.

•

MIC2 VOL (Microphone channel 2 volume)

Use this setting to set the maximum volume level for micro-

phone channel 2. NOTE: If this is set too low, the micro-

phone will not be loud enough.

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust the

maximum

volume for microphone

channel 2

.

Volume Range: 0 -- 80

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

raise the volume.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control to

lower the volume.

•

MIC BASS (Microphone bass tone level)

Use this setting to adjust the amount of bass tone that is

present in the microphone channels 1 and 2.

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust the

microphone

bass tone level

.

Bass Tone Range: -10dB -- +10

dB

Bass Tone Range: -10dB -- +10dBBass Tone Range: -10dB -- +10

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

increase the bass.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control

decrease the bass.

•

MIC TREB (Microphone Treble tone level)

Use this setting to adjust the amount of treble that is pres-

ent in the microphone channels 1 and 2.

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust

the microphone

treble level

.

Treble Tone Range: -10dB -- +10

dB

Treble Tone Range: -10dB -- +10dBTreble Tone Range: -10dB -- +10

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

increase the treble.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control

decrease the treble.

•

MIC DELAY (Microphone Echo/Delay Effect)

Use this setting to set the delay time for the DSP micro-

phone echo effect.

NOTE: The DSP effect volume must be set loud enough in

order to hear the effect

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust

the

delay time

.

Delay Time Range:

0ms -- 250ms

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

increase the delay time.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control

decrease the delay time.

•

REPEAT (

Mi

crophone

E

cho/Repeat Effect)

Use this setting to set the amount of repeat for the DSP

microphone echo effect.

NOTE: The DSP effect volume must be set loud enough in

order to hear the effect

Use t

he Input/Adjust knob on the front panel or the

and

buttons on the remote control to

adjust

repeat

level

.

Repeat Range:

0dB

--

0dB -- 0dB

8

0dB

1. Turn the Input/Adjust knob on the front panel clock-

wise or press the

button on the remote control to

increase the repeat level.

2. Turn the Input/Adjust knob on the front panel counter-

clockwise or press the

button on the remote control

decrease the repeat level.

Karaoke Mode cont.