1. Make sure TUNER is selected as the input source
2. Press the TUNER AUTO button on the remote control to
3. Press and hold the TUNER AUTO button on the remote
control for 3 seconds to begin automatic tuning
4. Radio frequencies will be scanned and stations stored
automatically as A1, A2, A3, A4, A5, etc. When all avail-
able radio stations are stored or if all 32 memory loca-
tions are full, the auto preset will stop
NOTE: Weak signals can affect the Automatic
Preset Storing function. Adjust the antenna for
best reception and a more efficient search.
Manually Presetting Stations
1. Press the TUNER AUTO button on the remote control to
2. Select a radio station using the SCAN + or SCAN -- but-
tons on the remote control.
3. Press the MEMORY button on the remote control. The
MEMORY indicator on the display screen will begin blink-
4. Press the A/B/C/D button on the remote control to
cycle through the preset banks (A to D) and select one.
5. Press one of the preset station number buttons (1 -- 8)
on the remote control to select a preset station number.
6. Repeat steps 2 to 5 to store other stations.
Retrieving Preset Stations
1. Press the TUNER AUTO button on the remote control to
2. Press the A/B/C/D button on the remote control to
select your desired preset bank.
3. Press one of the preset station number buttons (1 -- 8)
on the remote control to select your desired preset sta-
AM/FM Tuner Operations cont.
