A SERVICE OF

logo

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 413 MAINTENANCE
1
2
4
5
6
7
4
4
Grasp the Developer Waste Container with your
right hand. Pull the Developer Waste Container
completely out of the copier/printer, as illustrated
in Figure 19.
5
Remove the gold cap from the front of the used
Developer Waste Container, as illustrated in
Figure 20.
6
Securely push the gold cap over the opening on
the back of the waste container, as illustrated in
Figure 21, to prevent developer beads from
spilling out.
Figure 19: Removing the old
Developer Waste Container
Figure 20: Removing the cap
Figure 21: Placing the cap on
the waste container