TOOLS MODE 3–22 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
1
2
3
4
5
6
7
Corner Shift
Use this option if you selected the Corner Shift
option for Margin Shifts for either Side 1 or
Side 2.
Touch the desired corner shift position (Figure
29) and then touch Save to return to the
Feature Defaults screen.
Variable Shift
Use this option, illustrated in Figure 30, if you
selected the Variable Shift option for Margin
Shifts for either Side 1 or Side 2.
To set a horizontal shift, touch the right arrow
to shift the image to the right edge, or touch
the left arrow to shift the image to the left
edge from 0 to 17 inches (0 to 432 mm).
To set a vertical shift, touch the up arrow to
shift the image to the top edge, or touch the
bottom arrow to shift the image to the lower
edge from 0 to 17 inches (0 to 432 mm).
Touch Save to return to the Feature Defaults
screen.
Figure 29: Sample Corner Shift Default
screen
Figure 30: Sample Variable Shift Default
screen
