DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 4–21 MAINTENANCE
1
2
4
5
6
7
4
WARNING: The fuser can be very hot. To avoid
personal injury, wait at least 20 minutes before
performing the next step to allow the fuser to cool.
Do not touch any component other than those
indicated in the following procedure.
4
Press down on the gold Front and Rear Release
buttons on the top of the fuser assembly, as
illustrated in Figure 35, to unlatch the Cleaning
Web (area E). The web opens to the right of the
Paper Path Module.
5
Gently push down on the Cleaning Web (E) and
pull it toward the right to remove the web from the
copier/printer, as illustrated in Figure 36.
6
Place the Cleaning Web in a bag and dispose of
the web according to local regulations.
Figure 34: Allow the fuser to cool
Figure 35: Unlatching the Cleaning Web
Figure 36: Removing the Cleaning Web
E
