Filter
Top Products
2
3M Dynapro ET 350 Monitor User’s Installation Guide
Software guides
The ET 350 monitor User’s Installation Guide explains how to install
touch screen software that will run with operating systems supported by
the ET 350 (see Chapter 2).
For information on how to customize the software, refer to one of the
following manuals. Both of these software guides may be downloaded
from the 3M Touch Systems web site (www.3Mtouch.com
).
For Windows XP Professional and Windows 2000 Professional
operating systems, refer to: MicroTouch NFI Software Guide for
Windows XP and Windows 2000.
ForWindows NT 4.0 and Windows 9X operating systems, refer to:
Configuration Utilities User’s Guide.
README files
On the floppy disks that came with your ET 350 monitor, there are
README files with driver installation instructions and other driver
information.
Terms The following terms may not be familiar to all users:
This term Refers to
ACPI Advanced Configuration and Power Interface. A power
management feature that is configurable in Windows
operating systems.
Bezel* The front rim of the ET 350 monitor that contains the touch
screen and the TouchSurround.
Display area* The part of the touch screen that is positioned over the display
of the monitor. Touches in the display area emulate the
movements and actions of a mouse.
DPMS Display power management system. For the ET 350 monitor,
a power management setting that is configurable with controls
inside the enclosure of the unit.
Graphic underlay
(also called
TouchSurround
underlay)
A graphic that illustrates the TouchSurround and fits behind
the touch screen. 3M Dynapro industrial products may be
ordered with standard or custom underlays. Buttons and
controls for the standard underlays are pre-defined; you must
define buttons and controls for custom underlays.
KVM extender An optional feature of the ET 350 monitor that allows the
monitor to be located as much as 1000 feet (300 meters) from
the host computer.
MicroTouch
TM
Near
Field Imaging
TM
(NFI) touch screen
A touch screen that uses a proprietary imaging technique to
generate a precise profile of a touch from voltage changes in
the electrostatic field close to the point of contact.
Touch screen The front surface of the ET 350 monitor, comprising the
display area and the TouchSurround.
TouchSurround* The area on the front of the touch screen, not including the
display area. With the TouchSurround, part of the touch
screen can be used to define keys (such as keyboard keys).
*For illustration identifying this item, see Figure 1, page 6