3M ET 350 Car Video System User Manual


 
3M Dynapro ET 350 Monitor User’s Installation Guide
54
FCC compliance This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy,
and if installed and used in accordance with the instruction manual, may
cause interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
CE and EMC
emissions
compliance
This is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to take
adequate measures.
The ET 350 monitor complies with the CE mark related to the Low
Voltage Directive 73/23/EEC as confirmed in the Declaration of
Conformity.
The ET 350 monitor complies with the CE mark related to the EMC
Directive 89/336/EEC as confirmed in the Declaration of Conformity.
Canadian
emissions
compliance
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appariel numerique de la classe A respecte toutes les exigences
due Reglement sur le material brouilleur du Canada.
Electromagnetic
compatibility
immunity
standards
Electromagnetic compatibility immunity standards EN61000-6-2
ITE immunity EN55024
Electrostatic discharge EN61000-4-2
Radiated immunity EN61000-4-3
Electrical fast transient EN61000-4-4
Surge transient EN61000-4-5
Conducted immunity EN61000-4-6
AC sags and dropouts EN61000-4-11