Filter
Top Products
93 Chapter 10
10.11 Set Password
These option allows you to set your system passwords. The way to set up
the password is as follows:
1. Choose “Change Password” in the Main Menu and press <Enter>.
Then following message appears:
“Enter Password : “
2. The first time you run this option, enter your password up to 8 char-
acters and press <Enter>. (The screen does not display the entered
characters.)
3. After you enter the password, the following message appears
prompting you to confirm the password:
“Confirm Password : “
4. Enter the same password “exactly” the same as you have just typed
to confirm the password and press <Enter>.
5. Move the cursor to Save & Exit Setup to save the password.
6. If you need to delete the password entered before, choose the
Supervisor Password and press <Enter>. It will delete the password
that you have entered before.
7. Move the cursor to Save & Exit Setup to save the option you have
just configured; otherwise the old password will still be there the
next time you turn your system on.
8. Press <Enter> to exit to the Main Menu.
Note: If you forget or lose the password, the only way
to access the system is to clear the CMOS RAM.
All setup informations will be lost and you need
to run the BIOS setup program again.