Filter
Top Products
IPPC-9151 Series Users Manual 28
Chapter 4 Intel Chipset
4.1 Introduction
IPPC-9151 uses the 845GV chipset from Intel., with built-in high perfor-
mance 2D/3D Intel Extreme Graphics 2, flexible 100/133MHz system
bus settings, support for DDR266 SDRAM and multiple power saving
modes. This makes Intel 845GV the ideal integrated SMA chipset for the
Intel Pentium 4 and Intel Celeron processors.
The VIA VT82C686B PSIPC (PCI Super-I/O Integrated Peripheral Con-
troller) can support Intel and non-Intel based processor to PCI bus bridge
functionality to make a complete Microsoft PC99-compliant PCI/ISA
system, moreover, it also supports master mode enhanced IDE controller
with dual channel DMA engine (includes UltraDMA-33/66/100) and
interlaced dual channel commands.
4.2 Driver Installation
Before installing the driver, note the procedures below. You must know
which operating system you are using in your IPPC-9151, and then refer
to the corresponding installation flow chart. Then just follow the steps
described in the flow chart. You will quickly and successfully complete
the installation, even if you are not familiar with instructions for Win-
dows..
Important: 1. The following windows illustrations are exam-
ples only. You must follow the flow chart instruc-
tions and pay attention to the instructions which
then appear on your screen.
Notes: 1. The CD-ROM drive is designated as "D"
throughout this chapter.
2. <Enter> means pressing the "Enter" key on
the keyboard.