Filter
Top Products
IPPC-9151 Series Users Manual 84
IR Function Duplex
This item allows you to select the IR half / full duplex function.
The choices: Half; Full.
TX, RX inverting enable
This item allows you to enable the TX, RX inverting which depends on
different H/W requirement. This field is not recommended to change its
default setting.
The choices: “No, No”; “No, Yes”; “Yes, No”; “Yes, Yes”.
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical par-
allel (printer) port.
The choices: 378H/IRQ7; 278H/IRQ5; 3BC/IRQ7; Disabled.
Onboard Paralle Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible, or SPP unless you are certain your hardware and
software both support one of the other available modes. The choices:
SPP; EPP; ECP; ECP + EPP.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
The choices: 3; 1.
Parallel Port EPP Type
Select EPP port type 1.7 or 1.9. The choices: EPP1.7; 1.9.
Onboard Legacy Audio
This field controls the on-board audio.
• Sound Blaster
• SB I/O Base Address
• SB IRQ Select
• SB DMA Select
• MPU-401
• MPU-401 I/O Address
• Game Port (200-207H)
3. Press <ESC> to return to the Main Menu when you finish setting
up all items.