Filter
Top Products
24
English
Basic Operation
12
Turning Power On or Off
Some of this unit's functions, cannot be
performed while the vehicle is in motion. Be
sure to stop your vehicle in a safe location and
apply the parking brake, before attempting
these operations.
Press the PWR (Power) button to turn on the
unit.
The opening screen appears automatically.
Note: The unit can be turned on by pressing
any button on the unit except the MUTE,
OPEN/CLOSE and
(ANGLE)
buttons.
1
2
Press the PWR (Power) button again to turn off
the unit.
Notes:
• The CVA-1005 draws minimal current even
when its power switch is turned off. If the
switched power (ignition) lead of the CVA-
1005 is connected directly to the positive (+)
post of the vehicle's battery, the battery may
be discharged. If this lead is unswitched, it
must be disconnected from the battery post
should the vehicle be left unused for an
extended period of time.
An SPST (Single-Pole, Single-Throw) switch
(sold separately) can be added to simplify
this procedure. Then, you can simply place it
in the OFF position when you leave the
vehicle. Turn the SPST switch back ON
before using the CVA-1005. For connecting
the SPST switch, refer to the Installation
manual.
• Some operation of the unit cannot be
performed while the vehicle is in motion. In
this case, be sure to first stop your vehicle
and apply the parking brake, then perform
the operation.