Filter
Top Products
English
92
Navigation System
Operation (Optional)
1
2
Press the SOURCE button. The main menu
screen appears on the display.
1
Controlling Navigation
System
If an optional Alpine Navigation System is
connected to the CVA-1005, some of its
functions can be controlled from the CVA-1005.
The functions and display indicators available
will vary depending upon the Navigation
System connected. For details, consult your
Alpine dealer.
2
Rotate the rotary encoder and select "NAVI,"
then press the rotary encoder to execute the
selection.
The Function Guide display changes to show
the same button names as those for the remote
control supplied with your navigation system.
Notes:
• When the NAVI button is pressed while the
NAVI selection mode is being selected in the
VISUAL setting (refer to page 172), the
navigation mode will be directly activated.
• If the NAVI mode menu is not displayed on
the main menu screen, select "AUX IN" in the
Initialization mode screen and set the NAVI
mode to the ON position.
• If you use the buttons displayed, you can
control the navigation system from CVA-1005
in the similar way to the remote control
operation.
For operation, refer to the Owner's Manual
for your navigation system.
• Depending on the navigation system
connected to this unit, some functions and
displays may vary.