Filter
Top Products
English
86
DVD/Video CD/
CD Player Operation (Optional)
2
1
Press the SOURCE button to display the main
menu screen.
Rotate the rotary encoder and select "DVD"
from the menu. Then, press the rotary encoder
to execute the selection.
The display shows the DVD player mode
screen.
Insert a disc into the DVD/video CD/CD player,
the player starts playing.
Note:
Press the FUNC (F.GUIDE) button during
DVD/video CD/CD play to turn on or off the
Function Guide display.
In the ON position:
The Function Guide display will always be
shown.
In the OFF position:
The Function Guide display will disappear
after approx. 5 seconds if no button is
pressed.
If you want to display the Function Guide
screen again, press any one of the Function
buttons 1 through FUNC .
Now, the locking system for the DVD mode
operation has been released. Unless the
ignition key is turned to the OFF position, the
DVD mode can be activated by engaging the
parking brake without performing the above
procedure (1 through 3).
Each time the ignition key is turned to the OFF
position, perform the above procedure.
Note: If you try to activate the DVD mode
while driving will display the warning-
CAN'T OPERATE WHILE DRIVING.