Filter
Top Products
35-EN
Note
• Depending on the connected iPod, track up/down may be not available
during Repeat play.
Displaying the Text
You can display the tag information of a song in the iPhone/iPod.
1
Press VIEW.
Each press changes the display.
Note
• When the Text Scroll is set to Manual, press and hold VIEW for at least
2 seconds, the current text will be scrolled one time.
*1 TAG information
If the Text Scroll (refer to “Scroll Setting (Text Scroll)” on
page 23) is set to “Auto,” the tag information will scroll
automatically.
If there is no text information, nothing will be displayed.
*2 The numbers of all songs displayed vary depending on the songs
selected by the search.
*3 When the Text Scroll (refer to “Scroll Setting (Text Scroll)” on
page 23) is set to “Auto,” the display cannot be switched by
pressing VIEW. The display contents switch alternately.
Notes
• Only alphanumeric characters (ASCII) can be displayed.
• The maximum number of characters for the head unit is 128 (128 byte).
• Some characters may not be correctly displayed.
• The display is blank when text information is not compatible with this
unit.
Alpine introduces IMPRINT - the world’s first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended.
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Changing MultEQ mode
MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Press and hold SOUND SETUP for at Least 2 seconds to
activate the Sound menu selection mode.
2
Turn the Rotary encoder to select MultEQ Mode, and then
press ENTER.
3
Turn the Rotary encoder to select the desired MultEQ
mode, and then press ENTER.
OFF (Manual Mode) Curve 1 (MultEQ-1) Curve 2 (MultEQ-2)
Notes
• The Curve mode can be selected only when Curve 1 and Curve 2 are
stored.
• When using MultEQ, MX, X-Over, T.Correction, Factory’s EQ, SUBW.
Phase, SUBW. Channel, TW Setup, EQ Mode, Filter Type and
Parametric EQ/Graphic EQ are set automatically. They are no longer
user adjustable.
• When an external audio processor is connected, the MultEQ function
cannot be used.
*3
*3
Track No./All Songs No.
*2
(Blank)
Elapsed Time
(Blank)
Calendar
Artist Name
*1
Song Name
*1
Clock
Track No./All Songs No.
*2
Album Name
*1
Song Name
*1
Elapsed Time
IMPRINT Operation
(optional)
BAND
/ESC
Preset buttons (1 through 6)
AUDIO/SOUND SETUP
SOURCE/
Rotary encoder/ENTER/