Filter
Top Products
43-EN
Note
• After selecting the desired disc, you can operate in the same way as for
the CD player of this unit. For details, see the CD/MP3/WMA/AAC
section.
Playing MP3 Files with the CD Changer
(optional)
If you connect a changer compatible with MP3, you can play CD-ROMs,
CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press SOURCE to switch to the MP3 Changer mode.
2
Press any one of the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
3
To pause playback, press .
Pressing again will resume playback.
Notes
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to “CD/
MP3/WMA/AAC” on page 12.
Multi-Changer Selection (optional)
Alpine’s Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press SOURCE on this unit to activate the CD Changer
mode.
Alternatively, press SOURCE on the remote control (RUE-4202)
to activate the CD Changer mode.
2
Press BAND to activate the CD Changer Selection mode.
The CD Changer Selection mode remains active for several
seconds.
3
Press BAND until the desired CD Changer indicator
appears on the display.
Notes
• If the selected CD Changer is not connected, the display will show “NO
CHANGER-(No.)”.
• To operate the selected changer, refer to “CD/MP3/WMA/AAC” on
page 12.
• For further details about the external input (AUX) when using
KCA-410C, refer to “Setting the AUX Mode (V-Link)” on page 22.
Controls on Remote Control
Source Button
Press this button to select the audio source.
Volume Adjustment Buttons
To increase the volume level:
Press the button
To decrease the volume level:
Press the button
Button
Radio mode:
Pressing this button will select, in ascending order, stations
programed into the radio’s presets as shown below.
...
CD Changer mode:
DISC Select (UP) button.
Press this button to select a disc in ascending order.
MP3/WMA/AAC mode:
Folder Select (UP) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (UP) / DISC Select (UP) button. Press this button to
select a folder in ascending order. Press and hold this button to
select a disc in ascending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
DN Button
Radio mode:
SEEK (DN) Button.
CD/iPod mode:
Press this button to go back to the beginning of the current track.
Button
Press this button to switch between the Play and Pause modes for
CD.
Audio Processor Button
Each press of the button changes the audio processor mode.
For details, refer to “Operating the Audio Processor” as shown below.
Press the button to activate the external audio processor mode when
the external audio processor is connected.
*
* For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased. When the
SOURCE
BAND
Remote Control