Filter
Top Products
44-EN
IMPRINT audio processor (PXA-H100) (sold separately) is
connected, refer to “IMPRINT Operation (optional)” on page 35.
Power Button
Press this button to turn the power on/off.
Band Button
Radio mode:
BAND Button.
Press this button and the band will change.
Changer mode:
To switch the changer.
UP Button
Radio mode:
SEEK (UP) button.
CD/iPod mode:
Press this button to advance to the beginning of the next track.
Button
Radio mode:
Pressing this button will select, in descending order, stations
programed into the radio’s presets as shown below.
...
CD Changer mode:
DISC Select (DN) button.
Press this button to select a disc in descending order.
MP3/WMA/AAC mode:
Folder Select (DN) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (DN) / DISC Select (DN) button.
Press this button to select a folder in descending order.
Press and hold this button to select a disc in descending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
Operating the Audio Processor
1
Press A.PROC to select the mode.
Normal mode Time Correction X-OVER Normal mode
2
Press or to select the item.
Time Correction mode/Crossover (X-OVER) mode:
Select from MEMORY 1 through 6.
Battery Replacement
Applicable battery: Use two “AAA” sized dry batteries or equivalent.
1
Opening the battery cover
Slide out the battery cover while firmly pressing in the direction
of the arrow.
2
Replacing the battery
Insert the batteries, observing the polarities as illustrated.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Controllable With Remote Control
Point the remote control transmitter at the remote control sensor.
Connectable to Remote Control Interface
Box
This unit may be controlled from the vehicle’s audio controls.
An optional Alpine Remote Control Interface Box must be used. For
details, contact your Alpine dealer.
Remote control sensor