Filter
Top Products
17
u In the Bluetooth® menu, select the "PAIRING"
menu item.
u Press the rotary control
7
to open the menu.
The "MOBILE PHONE" menu item is selected.
u Turn the rotary control
7
to select the
"STREAMING" menu item.
u Press the rotary control
7
to register a
streaming device.
The display shows the currently stored
PIN (default "1234"). If required, enter the
PIN of the streaming device:
u Turn the rotary control
7
to select a digit for
the respective position.
u Press the rotary control
7
to go to the next
position.
Notes:
• To return to the previous position for the
PIN entry, turn the rotary control
7
until
the "<<<" option is selected, and press the
rotary control
7
.
• Not all streaming devices require the entry
of a PIN on the car sound system. For some
streaming devices, you have to enter the
PIN of the car sound system instead. For
these devices, press only the rotary control
7
repeatedly until you reach beyond the
last position, thereby con rming the cur-
rent PIN, and then enter this PIN on the
streaming device.
The display shows "PAIRING" and the Blue-
tooth® symbol
is ashing. The car sound sys-
tem can now be recognised by the streaming
device for approx. 2 minutes and connected.
u Search the car sound system from your stream-
ing device (Bluetooth® name: "BP 420 BT") and
establish the connection. Enter the PIN of the
car sound system, if necessary.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are paired and
connected.
Notes:
• If no connection can be established, the
display brie y shows "CONNECT FAILED".
• After switch-on, the car sound system
automatically attempts to reconnect the
device connected last. If the connection
attempt fails, the display brie y shows
"CONNECTION LOST". If necessary, attempt
to re-establish the connection from the
streaming device.
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "INCOMING CALL" and the number of the
caller. The current audio source is muted and a
ring tone is played via the loudspeakers of the car
sound system.
Note:
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE NUM-
BER" instead of the number. If the number
of the caller is stored together with a name,
the name of the entry and the number are
displayed (see the section "Storing a phone
number in the car sound system" in this chap-
ter).
u Press the
button
=
to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
u Press the
<
button to reject the call or
to end the current call.
The display shows "CALL END".
Notes:
• During the call, you can adjust the volume
with the volume control
4
or mute the
device with a short press of the On/O
button
3
.
• You can adjust the volume for the call play-
back in the user menu (see the chapter
"User settings", section "Making settings in
the "VOLUME" menu", menu item "HANDS-
FREE VOL").
Bluetooth®