Filter
Top Products
21
Each entry consists of a name and a number, each
up to 20 characters on digits.
Note:
Do not switch o the car sound system while
transferring the phone book. If you do or if the
power supply of the car sound system should
be interrupted for any reason, you have to re-
start the transfer.
u In the Bluetooth® menu, select the "DOWN-
LOAD P–BOOK" menu item.
u Press the rotary control
7
.
The display shows "CONFIRM".
u Press the rotary control
7
again.
"PHONEBOOK DOWNLOADING – PLEASE
WAIT" appears on the display.
After the download is complete, the display
brie y shows "DOWNLD COMPLETE".
Notes:
• To cancel the transfer, press the
but-
ton
<
.
• If the transfer of the phone book fails,
the display brie y shows "DOWNLOAD
FAILED".
• If the transfer of the phone book exceeds
the storage capacity of the car sound sys-
tem, the display brie y shows "PHONE-
BOOK FULL". The phone book entries trans-
ferred so far remain stored.
• If you supplemented or changed entries
on your cell phone since the last transfer,
you can update the phone book on the car
sound system by transferring it again. If the
storage capacity of the car sound system
is exceeded in the process, rst delete the
already transferred phone book (see the
next section) or unpair another cell phone,
if necessary, so that its phone book is also
deleted from the car sound system (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Managing paired
devices").
• If you insert a CD during an ongoing trans-
fer, the playback does not start until the
transfer is completed.
Deleting the phone book of the cell phone
from the car sound system
You can delete the phone book of the connected
cell phone.
Note:
The telephone remains connected.
u In the Bluetooth® menu, select the "DELETE
P–BOOK" menu item.
u Press the rotary control
7
.
The display shows "CONFIRM".
u Press the rotary control
7
again.
Additional functions in the
Bluetooth® menu
Changing the Bluetooth® PIN
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
u In the Bluetooth® menu, select the "PIN EDIT"
menu item.
u Press the rotary control
7
to open the entry
menu.
You can now enter the PIN:
u Turn the rotary control
7
to select a digit for
the respective position.
u Press the rotary control
7
to go to the next
position.
Note:
To return to the previous position in the
entry menu, turn the rotary control
7
until
the "<<<" option is selected, and press the
rotary control
7
.
Bluetooth®