Filter
Top Products
27
Making settings in the "TUNER"
menu
TRAFFICINFO (tra c information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching prior-
ity for tra c announcements on or o . Settings:
ON, OFF.
u Press the rotary control
7
to change the
setting.
u Turn the rotary control
7
to change be-
tween the settings.
u Press the rotary control
7
to con rm the
setting.
If priority is switched on for tra c information, the
display shows the icon
.
BAND SELECTION
Activating or deactivating memory banks.
Memory banks that can be deactivated:
Region Memory banks
EUROPE FM2, FMT, MW, LW
USA FM2, FMT, AM, AMT
SOUTH AMERICA FM2, FMT, AM, AMT
THAILAND FM2, FMT, AM, AMT
Settings in each case: ON, OFF.
u Press the rotary control
7
to open the menu.
u Turn the rotary control
7
until the desired
memory bank is set.
u Press the rotary control
7
to change the
setting.
u Turn the rotary control
7
to toggle between
the settings ON (activate memory bank) and
OFF (deactivate memory bank).
u Press the rotary control
7
to con rm the
setting.
Deactivated memory banks are skipped during
the source selection with the SRCbutton
@
.
Notes:
• In the factory default, all AM memory
banks are deactivated.
• If a memory bank is deactivated, the sta-
tions stored in this memory bank are re-
tained.
REGIONAL
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function on or o . Settings: ON, OFF.
u Press the rotary control
7
to change the
setting.
u Turn the rotary control
7
to change be-
tween the settings.
u Press the rotary control
7
to con rm the
setting.
SENSITIVITY
Setting the sensitivity of station seek tuning. Set-
tings: LO (–; low), HI (+; high).
u Press the rotary control
7
to change the
setting.
u Turn the rotary control
7
to change be-
tween the settings.
u Press the rotary control
7
to con rm the
setting.
RDS
Switching the RDS function on or o . Settings: ON,
OFF.
u Press the rotary control
7
to change the
setting.
u Turn the rotary control
7
to change be-
tween the settings.
u Press the rotary control
7
to con rm the
setting.
Note:
If the reception area "USA", "SOUTH AMERICA"
or "THAILAND" is selected, RDS is automati-
cally switched o . The station name continues
to be shown on the display.
User settings