Filter
Top Products
9
Radio mode
Scanning all stored stations of the waveband
u Press the rotary control
7
for approx. 2 sec-
onds to start the scanning.
During the scan, the display alternately dis-
plays the current frequency as well as memo-
ry bank and location or station name.
u Brie y press the rotary control
7
to continue
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations o ering the strongest
reception in the region in one memory bank. Any
previously stored stations in this memory bank are
deleted in the process.
With Travelstore, you can store 5 FM stations in
the FMT memory bank in all reception areas. In
the reception areas "USA", "SOUTH AMERICA" and
"THAILAND", you can also store 5 AM stations in
the AMT memory bank.
u Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
u Press the SRCbutton
@
for approx. 2 sec-
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
• For the reception area "EUROPE": If the
priority for tra c information is switched
on ( ), only tra c information stations
are stored.
• If the FMT or AMT memory bank is deac-
tivated (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "BAND SELECTION"), it
is automatically reactivated if you initiate
the Travelstore function.
PTY
In the reception areas "EUROPE" and "USA", an FM
station can transmit its current programme type,
e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE.
Hence, the PTY function allows a targeted search
for broadcasts of a certain programme type, e.g.
for rock or sports broadcasts. Note that PTY is not
supported by all stations.
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu",
menu item "PTY").
Selecting a programme type
To select a programme type. read the section
"Making settings in the "TUNER" menu", menu
item "PTY TYPES" in the chapter "User settings".
Note:
In the reception area "EUROPE", you can adjust
the language in which the programme types
are displayed (see the chapter "User settings",
section "Making settings in the " TUNER"
menu", menu item "PTY LANGUAGE").
Searching for stations
Prerequisite: PTY function is switched on.
u Press the rotary control
7
twice.
The display brie y shows "SEARCH PTY".
u Turn rotary control
7
one notch counter-
clockwise or clockwise to start the PTY seek
tuning.
During the seek tuning, "SEARCH" and the
currently selected programme type are
shown on the display.
As soon as a station with the desired pro-
gramme type is found, it remains being tuned
into.
Notes:
• If no station with the selected programme
type is found, "NO PTY" is brie y displayed
and 2 beeps can be heard. The radio will
then retune to the station that it played
last.