Filter
Top Products
23
External audio sources
Front AUX-IN socket
Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
As soon as an external audio source, such as a
portable MP3 player is connected to the front
AUX-IN socket
;
, it can be selected with the SRC
button
@
. "AUX" then appears on the display.
Notes:
• You can enter an individual name for the
AUX source that is shown on the display in
AUX mode (see the chapter "User settings",
section "Making settings in the "VARIOUS"
menu", menu item "AUX EDIT").
• You can play back an AUX source at the
same time with one of the internal audio
sources of the car sound system. Hence,
you can play back the announcements of
a navigation device connected to the front
AUX-IN socket
;
via the loudspeakers of
the car sound system while listening to
the radio or a CD at the same time. In ad-
dition, you can adjust the volume levels of
both audio sources to each other. For more
details, please read the section "Making
settings in the "VARIOUS" menu", menu
items "AUX MIX" and "AUX MIX GAIN" in
the chapter "User settings".
Sound settings
The following sound settings can be changed in
the "AUDIO" menu:
• Adjusting bass and treble
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(Loudness)
• Selecting a sound pro le (Sound Preset)
• Setting level and frequency of the preampli er
output (Sub-Out)
• Setting the 3-band equaliser
• Adjusting the time delay for switching in an
external ampli er
Calling and exiting the "AUDIO"
menu
u Brie y press the MENU button
2
to open
the user menu.
u Turn the rotary control
7
until the "AUDIO"
menu item is selected.
u Press the rotary control
7
to open the
"AUDIO" menu.
u Turn the rotary control
7
until the desired
menu item is selected.
u Perform the setting (see the next section).
u Brie y press the MENU button
2
to exit the
menu.
Notes:
• The menu is automatically exited approx.
60 seconds after the last button activation
and you are returned to the display of the
current audio source.
• To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
External audio sources | Sound settings