Filter
Top Products
76
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON (Enhanced Other Network)
ensures that whenever a traffi c announce-
ment (TA) is broadcast, the system switch-
es automatically from a station that does
not provide traffi c reports to the appropri-
ate traffi c information station within the
broadcasting network that does.
Once the traffi c announcement has been
played, the system will switch back to the
programme that you were listening to be-
fore.
Switching traffi c information
priority on/off
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol B.
Notes:
After approx. 16 seconds, a warning
beep sounds,
if you leave the reception area of a
traffi c information station that you
are currently listening to.
if you leave the reception area of a
traffi c information station that the
system is tuned into while you are in
the CD or CD changer mode, and the
subsequent automatic seek tuning
cannot fi nd a new traffi c information
station.
if you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
•
•
•
If you hear the warning beep, you can ei-
ther switch off traffi c information priority
or tune into a station that broadcasts traffi c
information.
Switching priority for traffi c information
on/off in radio mode (Traffi c)
To switch priority for traffi c information on/
off in radio mode,
press the BAND button ?.
The display shows the fi rst page of the
"Tuner" menu.
Press the softkey "Traffi c" 6 to switch
priority for traffi c information on or
off:
: Priority for traffi c information is
switched on.
: Priority for traffi c information is
switched off.
When you have finished making your
changes,
press the OK button B.
Switching priority for traffi c
information on/off in CD, CD changer
and MP3 mode (TA)
To switch priority for traffi c information on/
off in CD, CD changer and MP3 mode,
press the softkey "TA" 8.
Adjusting volume for traffi c
announcements (Traffi c Volume)
Press the MENU button A.
The menu is displayed.
Press the softkey "Volume Settings"
8.
The "Volume" menu is displayed.
u
u
•
•
u
u
u
u
Traffi c information
02_SeattleMP57_gb.indd 7602_SeattleMP57_gb.indd 76 08.03.2007 14:33:06 Uhr08.03.2007 14:33:06 Uhr