Filter
Top Products
92
Press the softkey "Enhanced" 9.
The "Enhanced Audio" menu is displayed.
Press the softkey "Enhanced Bass"
6.
The current settings for bass frequency and
quality factor are displayed.
Press the
or button > to change
between the setting options "Freq" (bass
frequency) and "Q" (quality factor).
Set the bass frequency and quality fac-
tor each with the
or button @.
When you have finished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Adjusting enhanced treble
settings (Enhanced Treble)
You can select 1 of 4 treble frequencies
(10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz).
Note:
For further information on setting the
treble level, read the section entitled
"Adjusting Treble" in this chapter.
Adjusting the treble frequency
Press the MENU button A.
The menu is displayed.
Press the softkey "Audio Settings" 6.
The "Audio" menu is displayed.
Press the softkey "Enhanced" 9.
The "Enhanced Audio" menu is displayed.
u
u
u
u
u
u
u
u
Press the softkey "Enhanced Treble"
7.
The current setting for treble frequency is
displayed.
Press the
or button @ or the
or
button > to adjust the treble fre-
quency.
When you have finished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Adjusting middle settings
(Middle)
You can select one of 4 middle frequencies
(500 Hz, 1,000 Hz, 1,500 Hz, 2,500 Hz)
and set the level for the selected frequency
between -7 and +7. You can also select one
of 4 quality factors (0.5, 0.75, 1.0, 1.25).
Adjusting middle frequency, level and
quality factor
Press the MENU button A.
The menu is displayed.
Press the softkey "Audio Settings" 6.
The "Audio" menu is displayed.
Press the softkey "Enhanced" 9.
The "Enhanced Audio" menu is displayed.
Press the softkey "Middle" ;.
The current settings for middle frequency,
level and quality factor are displayed.
Press the
or button > to change
between the setting options "Freq"
(centre frequency), "G" (level) and "Q"
(quality factor).
u
u
u
u
u
u
u
u
Sound
02_SeattleMP57_gb.indd 9202_SeattleMP57_gb.indd 92 08.03.2007 14:33:09 Uhr08.03.2007 14:33:09 Uhr