Filter
Top Products
100
To switch the rear AUX input on or off,
press the softkey "Auxiliary 1" ;.
: The rear AUX input is switched on.
: The rear AUX input is switched off.
To switch the front AUX-IN socket on or off,
press the softkey "Auxiliary 2" 6.
: The rear AUX input is switched on.
: The rear AUX input is switched off.
Note:
You can replace the factory-set wallpa-
per, which is shown on the display for
the AUX audio source, with your own.
For further details, please read the
section "Changing wallpapers of the
display" in the chapter "Adjusting the
display".
Naming external audio sources
(Edit Auxiliary)
You can name the rear AUX input and the
front AUX-IN socket. An external audio
source, which is connected via the rear AUX
input or the front AUX-IN socket, will then
appear on the display under the selected
name.
Press the MENU button A.
The menu is displayed.
Press the softkey "Aux Settings" :.
The "Aux" menu is displayed.
u
•
•
u
•
•
u
u
To name the rear AUX input,
press the softkey "Edit Auxiliary 1" :.
To name the front AUX-IN socket,
press the softkey "Edit Auxiliary 2" 7.
The 16-character text input is displayed.
The fi rst character is highlighted.
To switch between the entry positions,
press the
or button >.
To select a character at an entry position,
press the
or button @.
To save the name entered and to exit the
text input,
press the OK button B.
u
u
u
u
u
External audio sources
02_SeattleMP57_gb.indd 10002_SeattleMP57_gb.indd 100 08.03.2007 14:33:10 Uhr08.03.2007 14:33:10 Uhr