Filter
Top Products
57
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
TIM - Traffic Information
Memory
The unit has a digital voice memory in which
up to four traffic announcements with a dura-
tion of max. four minutes in all are automati-
cally recorded.
The oldest announcements are deleted de-
pending on the space needed for the latest
announcement.
If an announcement is longer than four min-
utes, “Overflow” appears on the display at the
end of four minutes to indicate that the entire
announcement could not be recorded.
If a new traffic announcement is made during
playback of the TIM, playback is interrupted
and the new announcement recorded.
Traffic announcements more than four hours
old when the unit is switched on are automat-
ically deleted.
Danger of damage to the remote an-
tenna at the car wash.
An automatic remote antenna stays fully
extended when TIM is activated even when
the car radio is switched off.
Damage can be caused if the remote an-
tenna remains extended at a car wash.
Please read the section “Interrupt TIM
record standby”.
Switching TIM on/off
You can switch the TIM function on and off
when the car radio is on.
➮ Press the TIM button 6 for approx. one
second.
The current status appears briefly on the dis-
play:
● “TIM 2H” = TIM is switched on
● “TIM OFF” = TIM is switched off.
When TIM is switched on, the traffic an-
nouncements of a set traffic radio station are
recorded for two hours after the unit is
switched off.
Recording traffic announcements
When the unit is switched on, traffic an-
nouncements are automatically recorded if a
traffic information station is tuned in.
When the unit is switched off, traffic announce-
ments are recorded for two hours if TIM is
switched on and a traffic information station
is tuned in.
If, when you switch on your radio, it is tuned
to a station which does not itself broadcast
traffic information and the TIM function is ac-
tivated, it will automatically search for a traffic
information station.
Altering TIM record standby time
You can alter the time your unit is on record
standby when switched off from two to 24
hours.
When TIM is activated, “TIM 2 H” will always
appear on the display when the car radio is
switched off.
In order to alter the TIM record standby time
to 24 hours,
➮ press the TIM button 6 when the car
radio is off.
“TIM 24H” will appear briefly on the display.
This indicates that the TIM function has been
set at max 24 hours for one single occasion.
A remote antenna remains extended for as
long as the TIM function is activated.
Each time the car radio is switched off, the
record standby time is reduced to 2 hours, to
protect the vehicle battery.
The connected remote antenna re-
mains extended while the TIM function is
activated.
TIM