Filter
Top Products
45
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Using your car radio for the
first time
If the car radio is being connected for the first
time or the power supply to the unit has been
interrupted, the install menu appears on the
display. Please make the following settings in
the install menu:
● select an external audio source instead
of a CD changer;
● set the time;
● adjust the tuner accordingly for opera-
tion in the United States or Europe;
● revert to manufacturer’s setting;
● switch the internal amplifier on/off.
You can go to the install menu at any time:
➮ Hold down the MENU 8 button until
the install menu appears on the display.
Entering settings
Selecting an external audio source
➮ Press the soft key 4 with the display
allocation “AUX”.
If “AUX” appears on the display, the input has
already been activated.
➮ Press the or button 7 to switch
“AUX” on or off.
➮ When the settings have been entered,
press the MENU button 8.
Note:
When the AUX input is activated, it can be
selected with the CDC = button.
Setting the clock
➮ Press the soft key 4 with the display
allocation “CLK”.
➮ Set the hours using the or button
7.
➮ Press the button 7.
➮ Set the minutes using the or button
7.
➮ Press the OK button 5.
Setting the tuner
➮ Press the soft key 4 with the display
allocation “TUNE”.
➮ Select “EUROPE” or “US” with the
or button 7.
➮ Press the OK button 5.
Switching the internal amplifier on/off
➮ Press the soft key 4 with the display
allocation “AMP”.
➮ Select “AMP ON” or “AMP OFF” with
the
or button 7.
➮ press the OK button 5.
Note:
When you set the internal amplifier at “AMP
OFF”, the loudspeaker directly connected to
the unit remains silent. In this case, only an
external amplifier produces sound.
Reverting to the manufacturer’s setting
➮ Press the soft key 4 with the display
allocation “NORM”.
“NORMSET” appears on the display. If you
really wish to return to the manufacturer’s
settings,
➮ press the OK button 5.
When you have completed all the settings,
➮ press the OK button 5.
Leaving the install menu
In order to leave the install menu,
➮ press the OK button 5. The settings
are now stored.
USING YOUR CAR RADIO FOR THE FIRST TIME