Filter
Top Products
72
TECHNICAL DATAEXTERNAL AUDIO SOURCES
External audio sources
Instead of the CD changer, you can also con-
nect up a different external audio source with
a line output. Such sources can be, for exam-
ple, portable CD players, MiniDisc players or
MP3 players.
The AUX output has to be switched on in the
install menu.
To connect up an external audio source, you
will need an adapter cable, obtainable from
any Blaupunkt dealer.
Switching the AUX input on/off
➮ Hold down the MENU button 8 until
the install menu appears on the display.
➮ Press the soft key 4 with the display
allocation “AUX”.
When “AUX” appears on the display, the in-
put is already activated.
➮ Press the or button 7 to switch
AUX on or off.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Note:
When the AUX input is switched on, it can be
selected using the CDC button =.
Technical data
Amplifier
Output power: 4 x 25 watts sine in
accordance with
DIN 45 324 at 14.4V,
4 x 45 watts max.
power
Tuner
Frequency ranges:
FM : 87,5 – 108 MHz
MW : 531 – 1 602 kHz
LW : 153 – 279 kHz
FM transmission range:
30 - 15 000 Hz
Cassette
Transmission range:
30 - 20 000 Hz
Pre-amp output
4 channels: 5 V / 10 kΩ
AUX input
Input sensitivity: 1,2 V / 10 kΩ
Subject to changes!