Filter
Top Products
71
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Subout/subwoofer
Setting the frequency and level
for the subwoofer
You can set the frequency and amplifier level
for a connected subwoofer. The settings you
make depend on the hifi system in your car
and the power of your subwoofer. Experiment
to find your ideal setting.
➮ Press the AUD button 9.
➮ Press the soft key 4 with the display
allocation “NEXT”.
➮ Press the soft key 4 with the display
allocation “SUB”.
➮ Press the or button 7 to select
between the frequencies “80 Hz” and
“100 Hz”.
➮ Set the desired amplifier level using the
or button 7.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
High-pass filter
Setting the high-pass filter
If a subwoofer is connected to your car radio,
you can use a high-pass filter (HP-F) to sup-
press the output of lower frequencies through
the internal final amplifier and an external pre-
amplifier that may be connected. This filter
has five adjustment levels. The settings de-
pend on the unit installed in your car. Experi-
ment to find your ideal setting.
➮ Press the AUD button 9.
➮ Press the soft key 4 with the display
allocation “NEXT”.
➮ Press the soft key 4 with the display
allocation “HP-F”.
➮ Press the or button 7 to switch
the high-pass filter on/off.
When the high-pass filter is activated,
➮ select the desired amplifier filter, “FIL-
TER1” - “FILTER5” using the
or
button 7.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
HIGH-PASS FILTERSUBOUT/SUBWOOFER