Filter
Top Products
58
Playback of recorded traffic
announcements
Four traffic announcements can be record-
ed.
If no announcement has been recorded, “NO
TIM” will appear on the display.
In order to listen to the recorded traffic an-
nouncements
➮ press the TIM button 6.
➮ Press the soft key marked for the de-
sired traffic announcement (“TIM1” to
“TIM4”).
“TIM1” is the latest announcement and will
be played back first. The other traffic an-
nouncements then follow in ascending order.
An arrow symbol flashes on the display along-
side the traffic announcement currently be-
ing played back. The name of the station which
transmitted the traffic announcement appears
on the display along with the time of record-
ing.
After the last announcement has been played,
the unit reverts to the previous mode.
In order to continue listening to the last active
audio source without listening to all traffic
announcements,
➮ press the TIM button 6.
Interrupting TIM record standby
(for the time spent at the car wash)
Before you drive into the car wash,
➮ switch the radio off.
If the display disappears immediately, TIM
record standby is switched off and the remote
antenna is pulled in.
➮ You can now enter the car wash.
If, after switching off the radio, “TIM 2H” ap-
pears briefly on the display, TIM record stand-
by is activated.
In order to deactivate TIM record standby,
➮ press the TIM button 6 until “TIM OFF”
appears briefly on the display.
TIM record standby is now deactivated and
the antenna is pulled in (make sure to check
this) and remains pulled in until the car radio
is switched on again.
➮ You can now drive into the car wash.
As soon as you switch on the radio, the TIM
function is immediately reactivated and the
remote antenna extended once more.
Note:
To prevent damage, do not switch the radio
on again until you have driven out of the car
wash.
TIM