Filter
Top Products
44
➮ Press the soft key 4 with the display
allocation “LED” to switch between “LED
ON” and “LED OFF”.
To leave the KeyCard menu,
➮ press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Displaying radio pass data
With the KeyCard supplied with your car ra-
dio, you can have the data on your radio pass,
such as name, type number (7 6 ...) and seri-
al number displayed.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “KC”.
➮ Press the soft key 4 with the display
allocation “READ”.
The radio pass data now appear on the dis-
play as main text.
To leave the KeyCard menu,
➮ press the MENU button 8 or OK 5.
Taking care of the KeyCard
Your KeyCard will function perfectly if the con-
tacts are kept free of all foreign particles. Avoid
direct skin contact.
Please clean the KeyCard contacts when
necessary with some white spirit on a lint-
free cloth.
Switching on/off
There are various ways of switching the car
radio on and off.
Switching on/off using the button
2
➮ To switch the unit on, press the button
2.
The car radio is now switched on.
➮ To switch the unit off, hold the button 2
down for more than two seconds.
The car radio is now switched off.
Switching on/off using the
ignition
If the car radio is correctly connected to the
ignition and has not been switched off using
the button 2, it is switched on/off simultane-
ously with the ignition.
You can also switch on your car radio when
the vehicle ignition is off.
➮ To do so, press the button 2.
Note:
To protect the vehicle battery, the unit switch-
es off automatically after one hour.
Switching on/off using the
KeyCard
You can switch the car radio on or off by in-
serting and removing the KeyCard if the unit
was previously switched off using the button
2. You can read about inserting/removing
the KeyCard in the chapter “Theft protection,
KeyCard”.
SWITCHING ON/OFFTHEFT PROTECTION