Filter
Top Products
75
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching PTY on/off
• Press TU and NEXT one after the
other.
• Press PTY to switch the function on or
off.
The red arrow will light up when PTY is
switched on. In addition, “PTY” will appear
under the top line in the display.
When the function is active, the program
type selected last will briefly appear in the
display, e.g. “Sport”. As long as PTY is ac-
tive, “PTY” will appear permanently in the
display.
Program type
Use << >> to have the last selected program
type displayed and to choose a new one.
You can select any one of the stored types
with the preset buttons 1-6.
Important: PTY must be active.
You can use the DSC menu to select Deut-
sch, English or Francais as the language
used in the display.
If necessary, refer to the section on “DSC
programming - TUN(er) PTY”.
The following list indicates all of the program
types which are currently available.
The letters printed in bold are identical to
the abbreviation which appears briefly in the
display.
News
Current Affairs
Information
Sport
Educate
Drama
Culture
Science
Varied
Pop Music
Rock Music
Easy Music
Light Music
Classics
Other Music
Weather
Finance
Children’s Programs
Social Affairs
Religion
Phone in
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Document
Checking the program type of the sta-
tion
You can check the type of program the sta-
tion you are tuned into is broadcasting. To
do so,
• press DIS repeatedly until the PTY
program type appears in the top line of
the display.
If “No PTY” appears in the display, the cur-
rent station has no PTY code.
Selecting and storing PTY program
types
When PTY is switched on, it is possible to
display the last PTY selected and the stored
program types for approx. 8 sec. One pro-
gram type is stored on each of the station
presets 1 to 6 at the factory.
Display the program types by
• pressing << or >>.
The program type selected last will appear
in the top line of the display. At the same
time, the stored program types will appear
in the display beside the corresponding pre-
set buttons.
Selecting stored program types
Now you can select one of the stored pro-
gram types. To do so,
• Press one of the presets 1 - 6.
Radio operation with RDS (Radio Data System)
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr75