Filter
Top Products
57
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CD changer operation (CDC)
During CD changer operation, use the
corresponding softkeys to select MIX,
SCAN, RPT (repeat), TPM and NAME.
Press CDC:
During CD changer operation, menu
level 1 indicates which magazine slots
contain CDs, use NEXT to page
through.
Press CDC to switch the menu level.
Now you can activate the functions
from “MIX” to “NAME”.
MIX
CD tracks are played in random order.
Press MIX to select the following func-
tions:
- MIX CD = The tracks on the CD se-
lected are played in random order.
The CDs are selected in numerical
order, the tracks then played back in
random order.
- MIX MAG = All of the tracks on the
CDs in the magazine are played
back in random order.
- MIX OFF = switches the function off.
SCAN
Scans the tracks on all of the CDs.
Start SCAN:
Press SCAN. The tracks will be
scanned in ascending order.
End SCAN:
Press SCAN. The track last scanned
will begin to play.
RPT - Repeat
CD tracks and entire CDs can be
played repeatedly.
Press RPT to select from the following
functions:
- REP TRCK = repeats track
- REP CD = repeats CD
- RPT off = switches the function off.
TPM - Track Program Memory
Stores and plays back your favourite
tracks. It is possible to archive up to 99
CDs with a maximum of 40 tracks each
(refer to the section on “TPM program-
ming”).
BLS (Blank Skip)
Skips over blank portions of the tape.
When the red arrow lights up in front of
“BLS”, this function has been activat-
ed.
As soon as the system detects a
pause of more than 10 seconds in the
tape playback, it will automatically fast-
forward the tape to the next song.
To switch Blank Skip on/off: Press
BLS. The function will be displayed
briefly in the top line of the display and
the DOT display.
DLBY (
Dolby B NR*)
Cassettes recorded using Dolby B NR
can be played back in the best possi-
ble quality. The function has been acti-
vated when the red arrow lights up in
front of “DLBY”.
To switch Dolby on/off: Press DLBY.
The function will be displayed briefly in
the top line of the display and the DOT
display.
* The noise reduction system is manufactured
under licence from the Dolby Laboratories Li-
censing Corporation. The word DOLBY and the
double-D symbol are trademarks of the DOLBY
Laboratories.
Quick Reference
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr57