Filter
Top Products
90
PTY
Use to select the language used to indicate
the program type: Deutsch, English or
Français.
SHARX
Switches the bandwidth in the FM frequen-
cy range.
When there are a large number of stations
within your current reception range, use <<
>> to switch to Sharx on which will prevent
most interference from adjacent radio sta-
tions.
This function has been set to “Sharx on” at
the factory.
S-DX
To adjust the seek tuning sensitivity.
“dx” stands for distant reception.
Select “dx3” if you want to receive strong
stations which are further away, select “dx1”
if you also want to tune into weaker stations
which are further away.
S-LO
To adjust the seek tuning sensitivity.
“lo” stands for local reception.
Select “lo3” if you want to receive strong sta-
tions in the local area, select “lo1” if you want
to tune into weaker stations in the local area.
HCUT
Interference-related cut in the treble sound.
Cuts the treble when interference occurs.
Can be adjusted from NO HICUT (off) to
HICUT 3 (highest setting). Switch off Hicut
with <<, adjust the values with
/ . Which
setting is the most pleasant is a matter of
personal preference.
DISP (Display)
Use this menu to make the display settings.
ANGL (angle)
Use
/ to adjust the display to your indi-
vidual viewing angle.
DIM
Use
/ to adjust the display brightness
for day and << >> for night.
FADE
Switches display off automatically.
Fader 1 - 15 sec. after the last adjustment
is made the display will switch
off completely.
Fader 2 - The top line remains illuminated,
everything else switches off af-
ter 15 sec.
Use
/ to adjust the setting.
Fade off - The display remains on perma-
nently when the audio system is
switched on.
Use << >> to adjust this setting.
VAR (Various)
Use this menu to make a number of differ-
ent settings.
TVOL
Use
/ to adjust the traffic announcement
and warning beep volume from between 0
to 66.
The traffic message will then come through
at this volume, if the standard volume is low-
er.
If the standard volume is set higher than the
TVOL level, then the traffic report will be
played at the standard volume.
BEEP
Acknowledgement tone for all functions
which require a button to be pressed for
more than one second.
Use
/ to set the volume between 1 and
9. Switch off Beep with << .
DSC programming
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr90