Filter
Top Products
91
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
DLAY (Delay)
If an amplifier has been connected to the
system, this setting can prevent the annoy-
ing power-on pop noise. Use the delay func-
tion to switch on the amplifier with a slight
delay.
“Delay 1” = 250 ms to “Delay 9” = 2.25 sec.
delayed power-on.
VOL (Volume)
Select the power-on volume.
Use / to adjust the desired volume lev-
el. If you use << to select “Last VOL”, the
system will come on at the volume selected
before it was switched off.
SCAN (SCANTIME)
Set the scan time for the Scan and Preset
Scan functions from 5 to 30 seconds. This
setting is valid for radio, cassette or CD scan.
HP-F (High pass function)
The proportion of low frequencies can be
reduced. It is advisable to take advantage
of this function when you have connected a
subwoofer.
Use
/ to select filters 1-5.
Use << to switch the high pass function off.
KC (KeyCard)
Use this menu to make adjustments to the
KeyCard settings.
READ
To read out the KeyCard data.
The card supplied with the radio is used to
display the model name, type number (7 6..)
and the serial number.
With the extra card it is possible to display
data entered by your specialised dealer.
(See the section on “Short Additional Mem-
ory S.A.M.”).
If you remove the KeyCard during the read-
ing process, “Insert” will appear on the dis-
play panel.
LRN (Learn)
To “train” a second KeyCard.
Please read the information in the section
on “KeyCard theft protection system” -
“Training a second KeyCard”.
LED (Light Emitting Diode)
When the audio system is switched off and
the KeyCard has been removed, you can
have the ON knob and an LED in the cas-
sette slot flash as additional theft protection.
The flashing light is not visible unless the
operating panel is open.
LED off << >> LED on.
Refer to the information in the section on
“KeyCard theft protection system” - “Flash-
ing light as theft protection”.
TOM
If you have a second KeyCard with a Turn-
On Message, you can switch off this infor-
mation with “TOM off”. The default setting
is “TOM on”.
TOM off << >> TOM on.
For more information refer to “ KeyCard theft
protection system” - “Turn on Message
(T.O.M.)”.
DSC programming
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr91