Blaupunkt RCM 169 Car Stereo System User Manual


 
78
Tape operation
Inserting a cassette
Switch on the car radio and release the
operating panel by pressing 1.
The operating panel will fold down forwards.
Insert the cassette with Side A or 1
facing up without the use of force.
The cassette will automatically be transport-
ed to its playing position. Cassette playback
will begin.
Grasp the left-hand side of the operat-
ing panel to fold it back up and lock it
into place.
Removing a cassette
With the operating panel in the fold-
down position, press the Eject button
(arrow) briefly.
The cassette will eject.
To prevent damage to the mechanism, do
not attempt to stop or force a cassette while
it is being inserted or ejected.
press a preset button which has a traf-
fic information station allocated to it.
or
b) Switch off the priority for traffic an-
nouncements:
press TA.
“TA” will disappear from the display.
Automatic seek tuning start
(Tape deck and CD changer operation)
If you leave the reception area for the traffic
information station you have tuned into while
you are playing the tape deck or a CD, the
system will automatically start searching for
a new TA station.
If no such station is found within approxi-
mately 30 seconds, a warning beep will
sound every 30 seconds. To switch the
warning beep off, proceed as described
above.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory, but
you can use the DSC function to alter the
setting as desired (refer to the section on
“DSC programming - VAR, TVOL”).
For safety’s sake, the operating
panel must always be returned to
the locked position while you are
driving.
Switching on tape deck opera-
tion
A cassette is inserted, “CC-IN” appears in
the display.
Press CC, the cassette functions will
appear in the display.
Dolby B NR*
This unit can play cassettes which have
been recorded with Dolby B NR or without
the use of noise suppression.
Cassettes which have been recorded with
Dolby B NR* exhibit significantly less tape
noise as well as much greater sound dynam-
ics.
The Dolby B NR function is active when the
red arrow in front of ”DLBY” lights up.
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr78