Filter
Top Products
12
Installation Instruction P/N 01 29 0 403 646
6. Route filter from DVD wiring harness (1) to
outside of bracket assembly as shown.
7. Locate and secure filter with a cable tie (2) to
the bracket to accommodate other
components in this location.
Note: Filter (1) shown in higher-than-
normal position for illustration purposes
only.
Caution: Check for bent pins on extension
cable before attaching extension cable to
A/V module cable. If pins are damaged
carefully adjust them back into position.
8. Align arrows on extension and A/V module
cables, and connect 2 video extension cables
to A/V module cables (1).
9. Connect white 4-pin connector to A/V module
4-pin connector (2).
10. Optional: Connect male end of Aux input
adapter P/N 84 11 0 392 070 into the female
end of A/V module. (3)
11. Secure connectors with vinyl tape or heat-
shrink tubing (1).
12. Assemble DVD Player (1) to mounting
brackets (2 & 3) as indicated using 4 M5x6
screws and split-lock washers (4). Brackets
should be mounted to DVD player at the
center of their slots.