Filter
Top Products
5
Installation Instruction P/N 01 29 0 403 646
Headrest Installation
Note: Select Headrest monitor labeled “A”
for left side and “B” for right side
1. Route monitor cable (2) down though
headrest-post opening and insert headrests
(1). Position headrest at the highest lockable
position (A).
Caution: Check for bent pins on monitor
cable before attaching monitor cable to
extension cable. If pins are damaged
carefully adjust them back into position
before connecting.
2. Align arrows on monitor and extension
cables, then connect cables and secure with
foam wrapping from kit.
Note: Passenger Seat Shown for Steps 3-
7.
3. Route extension cable 84 11 0 396 730 down
thru seat back as shown.
Note: Secure extension cable to seat back
bracket using cable ties (1) to prevent
monitor cable connection from moving
during headrest up/down adjustment.
Note: Routing of cable shown is for
passenger seat only. Driver seat cable
routing will differ.
4. Route extension cable through the lower
edge of the backrest (1) and under the plastic
clip at the edge of the seat (2).
5. Route remaining cable under seat towards
the front of the vehicle as shown
Warning: Failure to perform these steps
will result in damage to the monitor cable.