Filter
Top Products
4
Installation Instruction P/N 01 29 0 403 646
5. Remove 2 screws (1).
6. Lift rear of center console (2) and disconnect
eject box electrical connections between
center console and vehicle.
7. Center console may now be lifted out of
position and removed from vehicle, taking
care not to damage interior components.
8. Remove 2 forward nuts (1) securing base
bracket (2) Remove base bracket from
vehicle.
9. Remove 2 clips (3) from top of base bracket,
as they will be reused in a later step. Base
bracket will not be reused.
The following procedure must be performed
for both front seats. Complete right side, then
repeat procedure for left side.
10. Remove headrest (1).
11. Remove front seatbacks (2).
(Refer to RA 52 15 198)
Note: Seat back clips p/n 52 20 1 964 201
must be replaced with new parts.
(4 required)
12. Adjust seats to farthest rear position