Filter
Top Products
9
Installation Instruction P/N 01 29 0 403 646
Wiring Procedure for Vehicle Production 09/03 – 07/05
1. Remove 2 Torx bolts (1) from center console
mounting location and locate eject-box
connector (2).
2. Remove eject-box connector from bracket.
3. Unclip and slide wire shield off of eject box
connector (1).
4. Remove Pin 6, Violet/white wire (1) from
connector.
5. Insert pin removed from eject-box connector
into location 1 of black 2-pin connector (2)
included in kit.
6. Insert male pin (2) from DVD wiring harness
into pin location removed in previous step.
7. Connect male and female black 2-pin
connectors (1).
8. Re-assemble eject-box connector.